Print

The Wobbly Goblin Tavern - The ultimate bar roo...

Published on by

The Wobbly Goblin Tavern - The ultimate bar room brawl location!

The Wobbly Goblin Tavern... a terrain project for D&D and fantasy skirmish games such as Saga Age of Magic, Thud & Blunder, Otherworld, Badgers & Burrows and Lord of the Rings.

This blog is going to chart the development of The Tavern and its surrounding enviroment. The tavern and accesories are all 3D printed. They are going to be set into modular terrain tiles, (Sally 4th Terra-Formers) and landscaped in with laser engraved cobblestones and other scenic effects.

A couple of years ago I backed Hobgoblin 3D's Kickstarter for the Wobbly Goblin Tavern. Their Kickstarter was the deal of the century £15 for the files to make a 3D Tavern of immense proportions (well at least 20" long). The Kickstarter took a long, long time to deliver but the results were certainly worth waiting for. The tavern has been designed as a snap together kit with hundreds of pieces and an instruction manual that runs to 107 pages. I have glued my model together with superglue and once it has been painted it will be embedded into a 2' square Terra-Former tile.

3d Printed Wobbly Goblin Tavern Terrain

I am planning tohave the Inn and the initial tile completed by the end on June 2019. After that I will expand the lgaming area to 3'x3' with the inclusion of outbuildings including stables and barn and some gardens and a courtyard area.

These first four photos show the ground floor which has been completed and base coated with household emulsion. I use Sandtex exterior masonry paint (Bitter Chocolate) as an undercoat and primer on all terrain projects. The floor and stone course has then been undercoated with 'Granite Grey' matt household emulsion.

3d Printed Wobbly Goblin Tavern Terrain

I could not resist trying out my existing bar room furniture and fittings for size. These are a real mixture of frre 3D objects from Thingiverse, old metal and resin castings that I have had knocking around for years and some plastic pieces from board games such as Dungeon Saga and Conan!

3d Printed Wobbly Goblin Tavern Terrain

The ground floor of the tavern has a very large common room area with a significant fireplace and chimney at one end. There is plenty of room for a bar in the centre and more tables at the far end. There is a seperate room on the ground floor, which I am going to use as the guest room for the 'posh' visitors who can afford to pay for a bed for the night rather than a blanket in front of the fire..

3d Printed Wobbly Goblin Tavern Terrain

On the first floor is the accomodation for the Inn keeper, family and servants. I'll cover that and the roof sections in next weeks update.

Update 14th June 2019 - Roof & Out Buildings Printed - Layout Decided

Tavern for D&D Fantasy Skirmish

Today is a huge milestone, as I have finally finished 3D printing and assembling the roof sections. Each of the 3 roof sections have 64 seperate tile sections which are suspended on a framework of 'A' frames in a very similar way to a real roof. This completes the build of the Inn itself, it just all needs to be painted. The wooden plank sectrions on the ground floor have been painted and have had two levels of drybrushing applied to bring out the texture of the wood. Hopefully you can see the difference between the staircase that has been painted and the first floor wood work which has just been undercoated.

Tavern for D&D Fantasy Skirmish

Here's a look at the first floor accomodation with the roof off. I love the wooden veranda. I can see all sorts of swashbuckling swordplay going on along it!

Tavern for D&D Fantasy Skirmish

I also decided that an Inn was going to need stabling for customers horses, so a did a bit of searching on the Internet and found this rather nice design for medieval / fantasy stables. The 3D design files are from Infinite Dimensions. It was not a company that I had heard off, but as the design file was in the region of £11 I thought that I would give it a go, and I am very pleased with the results. There are doors to go in the openings at the front, however the sides are open as well, so I get the feeling that horses would just wander out. I am therfore planning to add individual stalls and hay and water provision by hand to complete the equine provision.

Tavern for D&D Fantasy Skirmish

If you've got stabling then you are also going to need some storage for hay, straw, oats etc. The thatched store room as also from Infinite Dimensions. When I brought it I noticed that it was a bit to big for my 6" wide print bed. I scales each piece down to 92% of original size. I think it is still plenty big enough and looks in scale with the other buildings and 28mm miniatures.

Tavern for D&D Fantasy Skirmish

I do rather like the design of the store house. It has a lot of gaming potential. The thatched roof section lifts off to reveal a second floor / attic.

Tavern for D&D Fantasy Skirmish

The first floor has a staircase going up to the second floor / attic and a door to an exterior platform which would be ideal for loading / unloading from wagons. The ground floor has some nice clutter designed in as part of the single piece and the external staircase leading up to the first floor.

Tavern for D&D Fantasy Skirmish

I have decided that their will be a cobbled courtyard between the Inn and the outbuildings to tie them all together. To build this I have designed and laser cut / engraved some 1" square, 1" x 2" and 2" square cobbled sections. These have nice deep etching between the cobbles, so I am hoping that once they are embedded in the terrain boards and painted up they will blend well with the 3D printed elements. I could off course have 3D printed some 'Dungeon Tile' to use, but that would have added a couple of extra weeks of 3D printing time. The engraved tiles are not on website, but if anyone else needs them for a project, give me a shout and I'll see what I can do!

I have also decided on the final configeration on modular terrain tiles. The Inn will be 3' x 3' with it's out buildings. The main building is goiing to be set into a 2' x 2; Terra-Former Tile with a road running in front off it. The 2' tile will be edged to the right and at the back by five 1' x 1;' plain Terra-Former Tiles. Four of the 1' square Terra Former Tiles are going to have cobble stone sections embedded in them and the last is going to be left plain to have the Inns vegetable garden and Orchard moddeled on to it.

 

I'm hoping to get some more work done on this hobby project over the weekend, so check back next week for updates, or better still, sign up to our newsletter!

Links:

Terra-Former Terrain Gallery

Terra-Former Videos

 

 

 

Comments: 0

Only registered users may post comments.
Sign in and post comment Register now