AV8F Fire Support Vehicle

£28.00

Resin kit to construct an early war version AV8F Fire Support Vehicle.
NB Picture shows vehicle with added Accessories kit (not supplied with vehicle)
Kits supplied unpainted & un-assembled.

3 in stock (can be backordered)

Description

NB Picture shows vehicle with added Accessories kit (not supplied with vehicle).

Resin kit to construct an early war version AV8F Fire Support Vehicle. Kits supplied unpainted & un-assembled. The AV8 series APC The standard EDF AV8 APC is a tracked, low profile vehicle, capable of carrying eight fully equipped infantry and a driver. Powered by a small fusion plant, the vehicle provides protection against small arms, as well as limited protection against missiles and large-calibre weapons. The AV8 has firing ports to allow the passengers to use their sidearm if required, as well as a post mounted 10mm M2-50 HMG, which is fired by a critter from an open hatch.

The early AV8 units were very reliable, but were intended for use in short, sharp engagements, not as the mobile dwelling for eight critters for weeks at a time. Consequently, these early vehicles were usually festooned with kit bags, boxes and other paraphernalia, which made them inefficient to work, and very messy to look at.

After Beii, a refined version was introduced, (the AV8B), which had stowage bins mounted along the length of the hull, above the track guard, as well as other minor improvements, but the basic vehicle was reliable and offered enough protection to be useful throughout the war, so long as you didn’t try to go anyplace really dangerous. The basic AV8 hull was subsequently adapted to create a range of specialist vehicles, most of which are not covered by this model.

One variant that is included is the AV8F. The AV8F is a fire support vehicle, usually referred to as a FIre Support Team (FIST) vehicle. The FIST vehicle is fitted with a turret that replaces some of the crew compartment, leaving space for four armed critters as well as the driver and commander/gunner. FIST vehicles are used two ways, either as a reconnaissance vehicle, carrying a half squad of critters for recon on foot or to provide security; or as part of a mechanised infantry support platoon, carrying a heavy weapons crew. Typically, the single person turret mounts a 30mm liquid-fuelled cannon and a 10mm HKMA 2-50 machine gun in co-axial mounts. However, some variants sport two PML tubes as well as the cannon – but it is not known if this was standard, or a field modification. This variant is referred to as AV8F2. Later War Improvements In Phase IV, the AV8G became standard, mounting a remoted turret with an HAKW 2-50 fitted. The remote turret helps to minimise crew exposure, and is controlled by a limited AI that is tasked by the driver – this reduces crew work load overall, while allowing every vehicle to be armed and still carry a full complement of troops. The FIST vehicle was also updated, using the laser technology fitted to the Aero 4 Aerodynes to replace the cannon in the AV8F3 variant. AI was retrofitted to many vehicles in Phase IV and afterward, performing all manner of tasks to support the crew and commanders, and making the vehicle and force more effective..

Model dimensions
Height: 40mm
Width: 75mm
Length: 120mm

Click here to take a look at the instructions for this kit.

Additional information

Weight 240 g

Reviews

There are no reviews yet.

Be the first to review “AV8F Fire Support Vehicle”

Your email address will not be published. Required fields are marked *